المنزل > المنتجات > شركة TVRO LNBF >
ST-C11CS C-Band Single LNBF with 3.7-4.2GHz Input Frequency 5.15GHz LO and 950-1450MHz Output for TVRO and FSS Applications

ST-C11CS C-Band Single LNBF with 3.7-4.2GHz Input Frequency 5.15GHz LO and 950-1450MHz Output for TVRO and FSS Applications

3.7-4.2GHz Input Frequency C-Band Single LNBF,5.15GHz LO Frequency TVRO LNB,950-1450MHz Output Frequency FSS LNB

5.15GHz LO Frequency TVRO LNB

950-1450MHz Output Frequency FSS LNB

مكان المنشأ:

الصين

اسم العلامة التجارية:

SETON

إصدار الشهادات:

CE, ISO, RoHS

رقم الموديل:

ST-C11CS

نتحدث الآن
اطلب اقتباس
تفاصيل المنتج
تردد الإدخال:
3.7-4.2 جيجا هرتز
تردد LO:
5.15 جيجا هرتز
تردد الإخراج:
950-1450 ميجا هرتز
مكاسب التحويل:
65 ديسيبل (النوع)
شكل الضوضاء:
12 درجة كلفن (كحد أقصى)
إبراز:

3.7-4.2GHz Input Frequency C-Band Single LNBF,5.15GHz LO Frequency TVRO LNB,950-1450MHz Output Frequency FSS LNB

,

5.15GHz LO Frequency TVRO LNB

,

950-1450MHz Output Frequency FSS LNB

شروط الدفع والشحن
الحد الأدنى لكمية
1000 قطعة
تفاصيل التغليف
كرتون
وقت التسليم
30-35 يوما
شروط الدفع
/ تي تي، ويسترن يونيون
القدرة على العرض
15 مليون قطعة
وصف المنتج
ST-C11CS C-Band Single LNBF - TVRO & FSS Professional Satellite Component
Professional satellite signal reception component for C-Band FSS applications.
Key Features
  • Frequency Range: 3.7~4.2 GHz
  • Dual Polarization: Vertical and Horizontal / Left-hand circular and Right-hand circular polarization
  • Universal C-Band compatibility
Technical Specifications
I/P Frequency Range 3.7-4.2GHz
O/P Frequency Range 950-1450MHz
L.O. Frequency 5.15GHz
Conversion Gain 65dB (Typical)
Noise Figure 12°K
LO Frequency Accuracy ±0.5MHz
Phase Noise -80dBc/Hz@10kHz
Output Impedance 75Ω F-Type
DC Power 11-20V/150mA (Max.)
Output VSWR 2.0:1
Output 1 dB Compression Point 0.0dBm [Min.]
Working Temperature -30°C to +60°C
Understanding Satellite Components
What is an LNB?
An LNB (Low Noise Block) or LNC (Low Noise Converter) is used for communications satellite reception. Mounted on the satellite dish, it collects and amplifies satellite signals, then down-converts them to manageable IF frequencies for transmission over coaxial cabling to the receiver. Available in C-Band, Ku-Band, and Ka-Band frequencies.
What is a feedhorn?
The feedhorn is a directional component of the LNB that captures signals reflected from the dish while shielding against extraneous radiation. It passes collected signals to the LNB electronics. Available in orthogonal feed, offset feed, and elliptical feed configurations.
What is a C-Band Single LNB?
  • C-Band: Receives radio frequency range 3.4-4.2 GHz
    • Lower frequency than Ku-band (10-12 GHz)
    • Better signal penetration through rain/weather
    • Requires larger satellite dishes (1.8-3 meters typical)
  • Single: Has only one output and one local oscillator (LO)
    • Can only connect to one receiver at a time
    • Cannot feed multiple receivers simultaneously
  • LNB: Low-Noise Block Downconverter
    • Converts high satellite frequencies to lower frequencies
    • Amplifies weak satellite signals with minimal added noise
How It Works
Signal Flow:
Satellite Signal (3.7 GHz) → LNB Reception → Mix with LO Frequency (5.15 GHz) → Output IF Signal (1.45 GHz) → Cable to Receiver
Technical Process
  1. Receives weak C-band signals from satellite (3.4-4.2 GHz)
  2. Uses internal local oscillator (typically 5150 MHz) to downconvert
  3. Outputs Intermediate Frequency (IF) = LO - Satellite Frequency
  4. Result: 950-1750 MHz range that can travel efficiently through coaxial cable
Example Calculation
Satellite frequency: 3720 MHz
LNB LO: 5150 MHz
Output to receiver: 5150 - 3720 = 1430 MHz
Advantages
• Low cost
• Simple installation
• Reliable for basic use
• Widely available

أرسل استفسارك مباشرة إلينا

سياسة الخصوصية الصين جودة جيدة فيسات إل إن بي المورد. حقوق الطبع والنشر © 2025-2026 Chenzhou Seton Technology Co., Ltd جميع الحقوق محفوظة