Place of Origin:
CHINA
Brand Name:
SETON
Certification:
CE, ISO, RoHS
Model Number:
ST-C11A
The C-Band Universal Single LNB ST-C11A is a high-performance satellite signal reception component specifically designed for C-band FSS (Fixed Satellite Service) applications. Featuring a 5.15GHz local oscillator design, it downconverts 3.7-4.2GHz satellite signals to 950-1450MHz IF output. It supports both linear (Vertical/Horizontal) and circular (LHCP/RHCP) polarization, adapting to different satellite polarization standards worldwide.
Key Advantages:
| Input Frequency: 3.7 ~ 4.2 GHz Full C-band FSS spectrum coverage Output Frequency: 950 ~ 1450 MHz LO Frequency: 5.15 GHz |
Supports both polarization types: Linear: Vertical (V) / Horizontal (H) Circular: LHCP / RHCP 13V/18V voltage switching control |
| Noise Temperature: 12°K Excellent equivalent noise figure Superior weak signal reception capability |
Conversion Gain: 65dB (Typ.) Output P1dB: ≥0.0dBm Output VSWR: ≤2.0:1 Stable and sufficient signal strength |
| LO Frequency: 5.15 GHz Frequency Accuracy: ±0.5 MHz Phase Noise: -80dBc/Hz @ 10kHz Reliable signal lock |
Operating Temperature: -30℃ ~ +60℃ DC Power: 11~20V / ≤110mA Adapts to all climate conditions |
| Output Interface: F-type (75Ω) Standard coaxial connection Compatible with mainstream satellite receivers |
No complex configuration required Install and use immediately Simple and fast installation |
| Item | Specification |
|---|---|
| Input Frequency | 3.7-4.2GHz |
| Local Oscillator | 5.15GHz |
| Output Frequency | 950-1450MHz |
| Conversion Gain | 65dB (Typical) |
| Noise Figure | 12°K |
| LO Frequency Accuracy | ±0.5MHz |
| Phase Noise | -80dBc/Hz@10kHz |
| Output Impedance | 75Ω F-Type |
| DC Power | 11-20V/110mA (Max.) |
| Output VSWR | 2.0:1 |
| Output 1 dB Compression Point | 0.0dBm [Min.] |
| Working Temperature | -30°C to +60°C |
| Challenge | How This LNB Solves It |
|---|---|
| Supports both linear (V/H) and circular (LHCP/RHCP) polarization – one LNB adapts to different satellite standards worldwide. | |
| Noise temperature as low as 12°K – excellent weak signal reception capability for clear picture quality. | |
| Typical gain 65dB with output VSWR ≤2.0:1 – sufficient signal strength for stable, reliable reception. | |
| Wide temperature design (-30℃~+60℃) – adapts to all climates for stable, reliable signal. | |
| Standard 75Ω F-type interface – compatible with the vast majority of satellite receivers on the market. |
| Application | Description |
|---|---|
| Broadcast and telecommunications carrier C-band satellite link reception | |
| High-quality C-band satellite television program reception | |
| C-band signal reception component for VSAT terminals | |
| Enterprise-grade C-band satellite private lines and data backhaul | |
| Adapts to different regional C-band polarization standards – globally compatible |
Q: What polarization types does this LNB support?
A: Supports two polarization types:
- Linear: Vertical / Horizontal
- Circular: LHCP (Left-Hand Circular) / RHCP (Right-Hand Circular)
Polarization switching is controlled by the receiver's 13V/18V voltage signals.
Q: What does 12°K noise temperature mean in practice?
A: Noise temperature is a measure of the LNB's self-generated noise. 12°K is an excellent level, equivalent to a noise figure below 0.5dB. This means the LNB generates very little self-noise and can receive very weak satellite signals, ensuring clear picture quality.
Q: Is 65dB gain sufficient for practical use?
A: Absolutely. 65dB is a standard high-gain level for C-band LNBs. For standard C-band FSS applications, this gain ensures sufficient signal strength with output VSWR ≤2.0:1 for stable reception.
Q: Can this LNB receive all C-band channels?
A: Yes. Input frequency covers the 3.7-4.2GHz full C-band FSS spectrum – can receive all C-band satellite programs within this range.
Q: What is the operating temperature range?
A: -30℃ to +60℃ – suitable for most climate conditions, from cold winters to hot summers.
Q: Does installation require professional expertise?
A: No. The standard F-type interface uses standard coaxial cable. However, professional dish alignment is recommended for optimal reception performance.
Send your inquiry directly to us